Line Settings Help

The Line Settings page is used to configure QX1000 IP Line settings.

Available Lines table displays the current status of Attached Extensions. If the line is attached to an extension, the corresponding extension number is displayed in this colum; otherwise "none" is displayed if extension is not attached to the line. By clicking on the extension number, the Extensions Management - General Settings page will appear, where the line attached to the extension can be reconfigured.

The IP Lines page contains a table with available IP lines on the QX1000. IP Lines table includes a list of IP lines on the QX1000 with the additional information about each of them (extension it is attached to from Extensions Management, information about the phone type and configuration details). Each column heading in the tables is created as a link. By clicking on the column heading, the table will be sorted by the selected column. Upon sorting (ascending, descending) arrows will be displayed close to the column heading.

When pressing on the IP line in the IP Lines column, the Edit IP Line Settings page specific for the current IP line will be displayed.

The alternating Hide disabled IP lines and Show disabled IP lines buttons are used to respectively hide or show the IP lines that have not been activated with a feature key. To enable the lines, install a feature key from the Features page.

By pressing the Web link in the Details column for each configured SIP phone will lead you to the Web configuration page of the corresponding SIP phone.
Note: This link only works from the LAN side of the QX1000, i.e. when the QX1000's GUI is accessed from a PC located in the QX1000's LAN. If you wish to connect the SIP phone's GUI through the WAN, an appropriate Incoming Traffic/Port Forwarding Filtering Rules should be added on the QX1000.

The Advanced link in the Details column appears for the Snom and Aastra IP phones and takes you to the Programmable Keys Configuration page where programmable keys for the corresponding IP phone can be configured.

The Reboot link in the Details column appears for supported IP phones and is used to remotely initiate a reboot of an IP phone attached to the line.

The IP Line Settings page allows to configure IP lines for IP phones to be connected to the QX1000. QX1000 provides the options to connect SIP phones to its LAN side, assign the corresponding IP line to some active extension and use SIP phones as simple phones with all telephony services of the QX1000 (for example: call hold, waiting, transfer, etc.). 200 active IP Lines are available on the QX1000 by default. Entering the feature key in the Features page will enable more IP lines.

The Enable PnP to IP lines checkbox is used to setup the SIP phones connected to the QX1000 via Plug and Play automatic configuration service. To use this service, this checkbox needs to be selected. The SIP phone should be reset then. After a clean boot-up of the SIP phone, QX1000 will detect the SIP phone and all its characteristics, generate the automatic configuration file and will upload it to the SIP phone. The SIP phone will be then configured on the first available IP line of the QX1000 and will become completely functional.
Note: The Plug and Play service is only available for the supported SIP phones. This service will not work in case if the SIP phone is already manually configured or if it is not reset after enabling the Enable PnP to IP lines checkbox.

The Enable Firmware Version Control checkbox is used to control the firmware version running on the SIP Phone attached to the QX1000. This service also allows you to have the new firmware automatically downloaded and installed on your SIP Phone (in case if your SIP phone was running an old firmware upon connecting to the QX1000 or when the QX1000's firmware has been updated and the compatibility was changed to the higher firmware version of the SIP phone). Every new firmware of QX1000 is compatible to a certain firmware version of each supported SIP phone. If you are running older firmware on your SIP phone, this service will automatically download and install the newer firmware on your SIP phone.
Note: The Firmware Version Control service is only available for snom and Aastra SIP phones.
Attention: Do not select this checkbox if you wish to run other firmware version on your SIP phone than the one compatible with the QX1000.

The Phones Default Template drop down list is used to select the QX1000 default template for the IP Phone which will be used if not selected otherwise on the particular line.

The Manage IP Phones Templates link takes to the IP Phones Templates page where custom IP phone templates may be created.

The Upload IP Phones Logo link takes to the IP Phones Logo page where custom logo for the IP phone may be uploaded.

The FXS Gateway Management link takes to the page where QX1000 FXS gateway devices may be defined in order to add additional FXS lines to the QX1000.