WAN Settings Help

The WAN Settings page requires all necessary information to connect Quadro Conference Server to the WAN, to make it able to reach external devices in the WAN and to receive SIP calls.

The Enable WAN Interface checkbox is used to activate the WAN interface on the Quadro Conference Server.

The Assign automatically via DHCP radio-button selection switches to automatic retrieval of the WAN IP address from a DHCP server at the ISP/uplink.

Note: DHCP here is the one running on the provider's side and not the Quadro's personal DHCP server.

The Assign Manually radio button switches to the manual adjustment of IP settings. This selection requests the following parameters:

IP Address requires the Quadro host address for the WAN interface.
Subnet Mask requires Quadro host subnet mask.
Default Gateway requires the IP address of the router all packets are sent to, e.g., the router of the provider.
The IP Clip button at the end of the lines opens a small window where one of the previously entered 10 IP addresses can be automatically selected again.