This page provides two functions. It allows an extension on the QX200 to register to an external SIP server.
The registration to the external SIP server (e.g. ITSP) is usually required before the server will allow the call to be received.
This page also allows for incoming SIP calls to ring an extension. Upon receiving a SIP Invite from an external SIP server,
the QX200 will look to match the called number with the settings in the User Name/DID Number field.
The User Name/DID Number is the registration user name on the external SIP server or the DID number from the ITSP.
The User Name/DID Number needs to be unique on the external SIP server. The field length is limited to 32 symbols.
The text field Password indicates the password for the extension registration on a SIP server.
The text field Confirm Password is used to confirm the password. If the entered Password does not correspond to the one entered in this field, the error message "The passwords does not match. Please try again" appears.
The text field SIP Server indicates the address of the SIP
server. The field is not limited regarding symbol usage and length as it can
be either an IP address or a host address (e.g. sip.epygi.com).
The text field SIP Port indicates the port number to connect to the SIP server. The SIP Port may only contain digit values, otherwise the error message "SIP Port is incorrect"
will appear. If the SIP server port is not specified, QX200 will access the SIP server via the default port 5060.
The checkbox Registration on SIP Server enables the SIP server registration option.
Note: If the ITSP does not require each DID to uniquely register to the external SIP server, then only enter the DID number in the
User Name/DID Number field. The other fields are not required.