The Internet Configuration Wizard allows the administrator to configure the WAN interface settings and to adjust QX1000's connectivity with external network. The Internet Configuration Wizard MUST be run for QX1000 to be connected to the Internet. It is strongly suggested to leave the factory default settings if their meanings are not completely clear to the administrating person.
All pages of the configuration wizard provide the following buttons:
Previous leads back to the previous page.
Next leads forward to the next page. On the last page of the basic configuration wizard the button is replaced with Finish that will save all modifications.
Cancel leads back to the QX1000 Management page.
Help will display the online help.
Note: The Finish button is available on the last page only. Whenever you select it, all settings you made are activated and the rollback feature is started. If for example the IP settings are not appropriate, you may lose access to QX1000. If that happens you will have to reboot or reconfigure your PC. After pressing the Finish button, the settings need to be confirmed on the Confirmation page within 20 minutes. If not, the device will switch back to the previous configuration and reboot.
The Next and Previous buttons navigate through the wizard pages. As a result of certain modifications one or more field values may be changed in the network features parameters. It is required to select the Finish button to submit the changes or Cancel to keep the initial data and return to the QX1000 Management page.
The wizard guides you through the following basic network configuration:
For Interface type Ethernet:
For Interface type VLAN: