The Configuration Summary page is used to generate a piece of legible configuration and to download it to a PC or to view it directly in the browser. This page consists of the following components:
The manipulation radio buttons are used to select between particular CGI or a named group of CGIs for which the legible configuration file will be generated.
The Specific CGI selection allows you to choose a certain CGI from the list of Quadro's Web management pages for which the legible configuration can be manually managed. For example, selecting "RTP Settings" will generate a legible configuration file with parameters present on the RTP Settings page.
The Named Group of CGIs selection allows you to choose among the four predefined groups: Internet Connection Settings, LAN Configuration Settings, Telephony General Settings and Extension Settings. Each of these groups refer to all CGIs characterized by the selected criteria, e.g. Internet Connection Settings group contains all parameters on the CGIs related to the networking and WAN configuration.
The Extension drop down list allows you to limit the settings in the generated legible configuration file to one specific extension. For example, each of the extensions on the Quadro have own SIP settings or Codecs. To download the settings for a particular extension only, you need to choose the corresponding extension from the list. The drop down may also have a blank selection. In that case the legible configuration file will contain the parameter of all available extensions on the Quadro (if the selected parameter applies to the extension and not to the overall system, like RTP settings).
The Start generate a legible configuration file button start parsing the configuration structure of the device for the defined parameters. The progress will be displayed in the area below.
The Cancel generation process button appears when the configuration generation procedure starts and it is used to stop it.
The Download generated configuration button becomes available when the legible configuration generation is finished. It is used to download the generated file to the PC in a plain text format. Necessary changes can be made in the downloaded configuration file and then uploaded back to the system.
Attention: Make sure the changes you have done in the downloaded legible configuration file are valid and will not corrupt the system when being uploaded back to device.
The View generated configuration button becomes available when the legible configuration generation is finished. It is used to view the generated file directly in the browser.
The Restart generation! button becomes available when the legible configuration generation is finished. It is used to cancel the generated configuration file and to start over.