The The Tunnels to Master Devices page consists of a table where master devices are listed with the corresponding authentication parameters.
The following functional buttons are used to manipulate with the content in the table:
Add functional button leads to the Add Entry page where a new master device parameters needs to be provided. The page consists of the following components:
The Enable Registration checkbox selection is used to enable the registration to the corresponding master device.
The Tunnel Name text field requires the tunnel name for the corresponding connection. System suggests you to start the SIP tunnel name with the "SIP_Tunnel_" words, according to the automatic prefix used for the SIP tunnels on the Quadro, however this is not mandatory.
The User Name text field requires the authentication user name. The field in front of this text field displays the default non-editable prefix for SIP tunnels: "SIPTunnel_".
The Password text field requires the authentication password.
Please Note: The User Name and Password should match both on master and slave Quadros for the successful SIP tunnel establishment.
The Master device IP text field requires the IP address of the master device.
The Master device port text field requires the SIP port number of the master device.
The Registration State field displays information whether the slave device is registered on the master or not.
The Registration Date/Time field displays the time and the date of last registration on the master's device.
Edit opens the Edit Entry page where the master device parameters can be modified. This page has the same components as Add Entry page does.
Delete removes the selected master device(s) from the table.
Select all checks all existing master devices in the table.
Inverse selection inverses the current selection (if no records are
selected, clicking on inverse selection will check all records).