The Manage IP Phone Templates page allows configuration of multiple IP phones. The IP phones templates help you manage the settings for group of IP phones,
which saves your time and ensures consistency.
This page allows you to adjust the IP phone's template general settings and define options for advanced configuration of the IP phones models, which can be common for
group of IP phones.
The subpages for each supported IP phone model allows you to define a set of extensions mapped to keys on IP phones (see Programmable Keys Configuration).
For Aastra models, the General Settings page contains the following components:
Local Dial Plan - indicates the number and pattern of digits dialed by the user in order to reach a particular destination.
Send Dial Plan Terminator - is used to switch a dial plan terminator or timeout. When the IP phone is configured to use a dial plan terminator (such as the pound sign (#)), the phone waits for 4 or 5 seconds after the handset is picked up or a key is pressed to place a call.
Play a Ring Splash - is used to switch a "call waiting tone" when there is an incoming call on the BLF (Busy Lamp Field) monitored extension. If the host tone is idle, the tone plays a "ring splash".
For snom models, the General Settings page contains the following components:
Dial-Plan String - indicates a dial plan string used to match dialed digits from the handset to the certain actions, e.g. dialing.
Dialog-Info Call Pickup - is used to switch a subscription to the status information of SIP URLs mapped as "Destination/Extension" on the programmable keys.
Transfer on Onhook - is used to switch the call transfer when the handset is placed on hook.
Call join on Xfer (2 calls) - when this option is enabled, you will connect the newly arrived incoming call to the call on hold by pressing Xfer button. When this option is disabled and you press the Xfer button, you will have an option to choose the call on hold to transfer the newly arrived incoming call to, or to dial a new destination manually.
Message LED for Dialog State/Missed Calls - when this option is enabled, the phone will indicate missed calls and changing dialog states using the message LED.
Dialtone during Hold - when this option is enabled and the call is held the caller gets dial tone. Otherwise there will be no dial tone after pressing Hold.
Do not Disturb - this selection allows you to manipulate with the IP phone DND service. When the *72 is selected from this list, the DND service of the IP Phone and the DND service of the Quadro for the corresponding extension will be activated when enabling the DND service from IP Phone. This option is recommended. When keyeventF_DND is selected only DND service of the phone will be activated when enabling the DND.
Record Missed Calls - when this option is selected, the information about the missed calls will be displayed on the IP Phone.
Any parameters not listed above or parameters defined in this page for other IP phone models can be found in the user's manual of the corresponding IP phone.
Note: Save changes before moving among the configuration pages.