Click on the Call Routing Table link on the Call Routing page.
Press the Add button on the Call Routing page.
Specify the Pattern in the corresponding field.
Select the Number of Discarded Symbols and Prefix if required.
Select the Call Type from the drop down list.
Define the Metric or leave it default.
Enter a Description if needed.
Enable Filter on Caller / Call Type / Modify Caller ID checkbox if route functionality should be limited depending on the inbound caller information.
Enable Set Date/Time Period(s) checkbox, if route should be functional within certain time/date interval.
Press Next.
Select user or attendant extension from Use Extension Settings drop down on behalf of which the call will be placed.
Specify the Destination Host and Port Number, Username and Password if the SIP or IP-PSTN call type has been selected. For IP-PSTN calls, enable Multiple Logons if necessary. Enable Use RTP Proxy, Use Secure RTP (SRTP) and Proceed Non-secure on Failure checkboxes, if needed.
Choose the Authentication and Accounting method from AAA Required drop down list.
Choose a Fail Reason from the corresponding drop down list.
Configure Transport Protocol for SIP messages and SIP Privacy parameters as needed.
Press Next.
Press Next.
If IP has selected on the previous step in the Inbound Call Type drop down list, Inbound Host should be inserted in the current page. If FXO or ISDN has been selected in the Inbound Call Type drop down list, ISDN trunk number followed by the list of timeslots or the FXO line number should be selected here.
If Set Date/Time Period(s) checkbox has been selected on the first page, pressing Next will open Date/Time Rules page where route validity should be defined.
Press Finish to create a local route with the inserted settings.