Available Lines table displays the current status of Attached Extensions. If the line is attached to an extension, the corresponding extension number is displayed in this colum; otherwise "none" is displayed if extension is not attached to the line. By clicking on the extension number, the Extensions Management - General Settings page will appear, where the line attached to the extension can be reconfigured. Additionally, the table provides information about the corresponding Caller ID methods that are listed in the line settings table (as the caller ID detection methods may be different for different types of phones, please refer to your phone manual) and the selected Ringer Type. Clicking on one of the available lines opens the page Edit Line Settings for the current line that is denoted in the headline. It displays the active voice codecs that are associated to that line.
The Loopback Settings link moves to the page where lines can be configured for the loopback diagnostics purposes.
The IP Lines page contains a table with available IP lines on the QX200. IP Lines table includes a list of IP lines on the QX200 with the additional information about each of them (extension it is attached to from Extensions Management, information about the phone type and configuration details). Each column heading in the tables is created as a link. By clicking on the column heading, the table will be sorted by the selected column. Upon sorting (ascending, descending) arrows will be displayed close to the column heading.
When pressing on the IP line in the IP Lines column, the Edit IP Line Settings page specific for the current IP line will be displayed.
By pressing the Web link in the Details column for each configured SIP phone will lead you to the Web configuration page of the corresponding SIP phone.
Note: This link only works from the LAN side of the QX200, i.e. when the QX200's GUI is accessed from a PC located in the QX200's LAN. If you wish to connect the SIP phone's GUI through the WAN, an appropriate Incoming Traffic/Port Forwarding Filtering Rules should be added on the QX200.
The Advanced link in the Details column appears for the Snom and Aastra IP phones and takes you to the Programmable Keys Configuration page where programmable keys for the corresponding IP phone can be configured.
The Reboot link in the Details column appears for supported IP phones and is used to remotely initiate a reboot of an IP phone attached to the line.
Entering the feature key in the Features page will enable more IP lines.
The Enable PnP to IP lines checkbox is used to setup the SIP phones connected to the QX200 via Plug and Play automatic configuration service. To use this service, this checkbox needs to be selected. The SIP phone should be reset then. After a clean boot-up of the SIP phone, QX200 will detect the SIP phone and all its characteristics, generate the automatic configuration file and will upload it to the SIP phone. The SIP phone will be then configured on the first available IP line of the QX200 and will become completely functional.
Note: The Plug and Play service is only available for the supported SIP phones. This service will not work in case if the SIP phone is already manually configured or if it is not reset after enabling the Enable PnP to IP lines checkbox.
The Enable Firmware Version Control checkbox is used to control the firmware version running on the SIP Phone attached to the QX200.
This service also allows you to have the new firmware automatically downloaded and installed on your SIP Phone
(in case if your SIP phone was running an old firmware upon connecting to the QX200 or when the QX200's
firmware has been updated and the compatibility was changed to the higher firmware version of the SIP phone). Every new firmware of
QX200 is compatible to a certain firmware version of each supported SIP phone. If you are running older firmware on your SIP phone, this service will automatically download and install the newer firmware on your SIP phone.
Note: The Firmware Version Control service is only available for snom and Aastra SIP phones.
Attention: Do not select this checkbox if you wish to run other firmware version on your SIP phone than the one compatible with the QX200.
The Configure IP phones from drop down list is used to select the QX200's interface where the IP phones are connected (LAN or WAN).
The Phones Default Template drop down list is used to select the QX200 default template for the IP Phone which will be used if not selected otherwise on the particular line.
The Manage IP Phones Templates link takes to the IP Phones Templates page where custom IP phone templates may be created.
The Upload IP Phones Logo link takes to the IP Phones Logo page where custom logo for the IP phone may be uploaded.
The FXS Gateway Management link takes to the page where QX200 FXS gateway devices may be defined in order to add additional FXS lines to the QX200.