The Add Multiple Extensions is used to add multiple extensions to the Extensions Management table at once. The page consists of the following components:
Quantity text field requires the number of extensions to be created at once. For example, inserting 5 in this text field will add 5 new extensions to the Extensions Management table.
Start from the Extension text field requires the number of the first new extension to be created. Depending on the value in the Quantity text field, the next extensions to be created will have subsequent numbers. For example, if you have inserted 41 in this text field and the Quantity text field contains the value "5", then extensions 41, 42, 43, 44 and 45 will be added to the Extensions Management table. If non-digit symbols have been entered, the error "Incorrect Extension: no symbol characters allowed" will appear. If an extension with the given numbers already exists in the Extensions Management table, a next subsequent not used extension number will be used instead.
Note: Extension cannot start with the digit 0. You can add extensions of up to 20 digits long. However, the Call Routing won't be adjusted automatically; you may need to manually adjust the routing rules for extensions in custom length.
Start from the SIP User Name text field requires the SIP server registration user name for the first extension to be created. Depending on the value in the Quantity text field, the next extensions to be created will have subsequent SIP user names. For example, if you have inserted 30201 in this text field and the Quantity text field contains the value "5", then the 5 newly created extensions will correspondingly have the following registration SIP user names: 30201, 30202, 30203, 30204 and 30205.
This user name is used for the registration on the SIP Server and should be unique on the SIP server. This field length is limited by 20 symbols and is not limited regarding the use of symbols.
If an extension with the given SIP user name already exists in the Extensions Management table, a next subsequent not used SIP user name will be used instead.
The Automatically attach to IP Line checkbox selection is used to automatically attach extensions to IP Lines.
Start From the IP Line text field requires the number of the new IP Line to be created. The error message "One or more IP Lines in the specified range are already attached to existing extensions" appears if an IP
line with the given numbers already exists in the Extensions Management table.
SIP Server text field requires the address of the SIP server. The field is not limited regarding symbol usage and length as it can be either an IP address or a host address (e.g. sip.epygi.com).
SIP Port text field requires the port number to connect to the SIP server. The SIP Port may only contain digit values, otherwise an error message "SIP Port is incorrect" will appear. If the SIP server port is not specified, Quadro will access the SIP server via the default 5060 port.
Registration on SIP Server checkbox enables the SIP server registration option on the newly created extensions.