Edit Line Settings Help

The page Edit Line Settings allows to select the Caller ID method, configure remote party disconnect indication, enable FAX support on the line and select a ringer type. Page contains following components:

The Caller ID drop down contains various standards of Caller ID transmissions. It is used to send the calling party's information to the phone attached to the selected line:

• No Caller ID.
• FSK, send prior first ring.
• FSK, send between first and second ring.
• FSK, send both prior to a ring and between first and second ring.
• DTMF, send prior first ring.
• DTMF, send between first and second ring.
• Combined, sending both DTMF prior to the first ring and FSK between first and second rings.

The Quadro sends the current time/date to the called phone together with the caller's information.

A group of Remote Party Disconnect Indication parameters are used to configure the private PBX attached to the Quadro FXS port.

• Enable Busy Tone Indication checkbox enables a busy tone transmission to the FXS port when remote party being called is disconnected. Busy Tone Duration drop down list is used to select the period (in seconds) when busy tone will be transmitted to the FXS port.
• Enable Power Disconnect Indication checkbox enables the power cycling on the FXS line when remote party being called is disconnected. Power Disconnect is applied after the busy tone transmission on the FXS line. Disconnect Duration drop down list is used to select the period (in milliseconds) when the FXS line power will be down.

The Ringer Type drop down list allows you to select the frequency of the ringer supported by the phone attached to the line. Information can be found on the phone enclosure or in the phone's manual. Problems with ringer might occur if ringer type selected here does not correspond to the one supported by the phone.

Note: The supported ringer type can be found on the bottom of the phone, in the "Ren:x.xN" value where N is the ringer type supported by the phone. For example, if the N=A, the TypeA ringer type should be selected, if the N=B, the TypeB&Z ringer type should be selected.

The Enable off-hook Caller ID checkbox enables Caller ID transmission to the phone in the off-hook state attached to a certain line. Service is applicable to the phones supporting the Call Waiting Caller ID feature.

The Enable Hot Desking Capability checkbox is used to enable the Hot Desking feature on the corresponding onboard analogue FXS line.

Note: When this option is enabled or the analogue FXS lines are attached to the corresponding extension, the caller gets dial tone. Otherwise there will be no dial tone for FXS lines.

The Hot Desking Automatic Logout section is used to configure Hot Desking functionality expiration on the corresponding FXS line. This may be useful when someone who logged in to the public phone with the extension attached to this line forgot to log out after using it. With this option enabled, once the expiration time arrives, the extension will automatically log out from the public phone. The following options are available:

• Never - the extension will never expire and will remain logged in to the public phone.
• After the defined period of time - requires the period after which the extension will automatically log out from the public phone.
• At the certain moment - requires the moment (hour and minute) when the extension will automatically log out from the public phone.